Dahua Technology DH-IPC-PDW3849-A180-AS-PV-ANZ Quick Start Manual

Dahua Technology DH-IPC-PDW3849-A180-AS-PV-ANZ Quick Start Manual

Eyeball network camera

Advertisement

Eyeball Network Camera
Quick Start Guide
ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD.
V1.0.2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DH-IPC-PDW3849-A180-AS-PV-ANZ and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Dahua Technology DH-IPC-PDW3849-A180-AS-PV-ANZ

  • Page 1 Eyeball Network Camera Quick Start Guide ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD. V1.0.2...
  • Page 2: Foreword

    Quick Start Guide Foreword General This manual introduces the installation, functions and operations of network camera. Read carefully before using the device, and keep the manual safe for future reference. Safety Instructions The following categorized signal words with defined meaning might appear in the manual. Signal Words Meaning Indicates a medium or low potential hazard which, if not avoided,...
  • Page 3 Quick Start Guide All the designs and software are subject to change without prior written notice. Product updates ● might result in some differences appearing between the actual product and the manual. Please contact customer service for the latest program and supplementary documentation. There might be deviations in the description of the technical data, functions and operations, or ●...
  • Page 4: Important Safeguards And Warnings

    Quick Start Guide Important Safeguards and Warnings This section introduces content covering the proper handling of the device, hazard prevention, and prevention of property damage. Read carefully before using the device, comply with the guidelines when using it. Transportation Requirements Transport the device under allowed humidity and temperature conditions.
  • Page 5 Quick Start Guide We recommend you use the device with a lightning protection device for stronger protection ● against lightning. For outdoor scenarios, strictly comply with the lightning protection regulations. Ground the function earthing portion of the device to improve its reliability (certain models ●...
  • Page 6 Quick Start Guide Use the accessories suggested by the manufacturer. Installation and maintenance must be ● performed by qualified professionals. Do not directly touch the photosensitive CMOS. Use an air blower to clean the dust or dirt on ● the lens. When it is necessary to clean the device, slightly wet a soft cloth with alcohol, and gently wipe away the dirt.
  • Page 7: Table Of Contents

    Quick Start Guide Table of Contents Foreword........................................I Important Safeguards and Warnings..............................III 1 Introduction......................................1 1.1 Appearance....................................1 1.2 Cable........................................1 1.3 Connecting Alarm Input/Output............................2 2 Network Configuration..................................4 2.1 Initializing the Camera................................4 2.2 Changing the Device IP Address............................5 2.3 Logging in to the Webpage..............................5 3 Installation.........................................6 3.1 Packing List....................................
  • Page 8: Introduction

    Quick Start Guide 1 Introduction 1.1 Appearance This manual is available for the following appearances. Figure 1-1 Available appearances 1.2 Cable Waterproof all the cable joints with insulating tape and waterproof tape to avoid short circuit and water damage. For the detailed operation, see FAQ manual. Figure 1-2 Cables Table 1-1 Cable information Port name...
  • Page 9: Connecting Alarm Input/Output

    Quick Start Guide Port name Description Connects to sound pickups to receive audio signals. Audio input Audio input is available on select models. Connects to speaker to output audio signals. Audio output Audio output is available on select models. Table 1-2 Description of Alarm I/O port Port Name Description ALARM_IN...
  • Page 10 Quick Start Guide default output signal is high-level (external pull-up voltage). The default output signal switches to low- level when an alarm is triggered (As long as the operating current is below 300 mA, the output low-level voltage is lower than 0.8 V). Mode B: Switch application.
  • Page 11: Network Configuration

    Quick Start Guide 2 Network Configuration Device initialization and IP setting can be finished with the ConfigTool or on webpage. For more information, see web operation manual. Device initialization is available on select models, and it is required at first-time use and after ●...
  • Page 12: Changing The Device Ip Address

    Quick Start Guide If initialization failed, click to see more information. Step 4 Click Finish. 2.2 Changing the Device IP Address You can change the IP address of one or more devices at a time. This section is based on ●...
  • Page 13: Installation

    Quick Start Guide 3 Installation 3.1 Packing List The tool required for the installation such as electric drill is not provided in the package. ● The operation manual and related tool information are contained in the disk or the QR code. ●...
  • Page 14 Quick Start Guide Figure 3-3 Dimensions: Model B (mm [inch]) Figure 3-4 Dimensions: Model C (mm [inch])
  • Page 15: Installing The Camera

    Quick Start Guide 3.3 Installing the Camera 3.3.1 Installation Methods Figure 3-5 Installation methods 3.3.2 (Optional) Installing the SD Card SD card slot is available on select models. ● Disconnect the power before installing or removing the SD card. ● Press and hold the reset button for 10 seconds to reset the device.
  • Page 16: Attaching The Camera

    Quick Start Guide 3.3.3 Attaching the Camera Make sure that the mounting surface is strong enough to hold at least three times the weight of the device and bracket. Figure 3-7 Cable going through the side cable tray...
  • Page 17: Optional) Installing Waterproof Connector

    Quick Start Guide Figure 3-8 Cable going through the mounting surface 3.3.4 (Optional) Installing Waterproof Connector This part is needed only when there is waterproof connector in the package and the device is used outdoors.
  • Page 18: Adjusting Lens Angle

    Quick Start Guide Figure 3-9 Install waterproof connector 3.3.5 Adjusting Lens Angle Figure 3-10 Adjust lens angle...

Table of Contents