Sony Vaio PCG-NV100 Series Quick Start Manual page 45

❑
If you are still experiencing problems, use your supplied Application
Recovery CD to reinstall the mouse drivers. See "To use the Application
Recovery CD(s)" on page 35 for more information.
My touch pad does not work properly.
❑
You may have disabled the touchpad without connecting a mouse to the
computer. To enable the touch pad:
1 Press the Windows key, and then press the Up Arrow
All Programs.
2 Press Enter.
3 Press the Down Arrow
Enter.
4 Make sure Sony Notebook Setup is selected, and press Enter.
5 Press the Right Arrow
6 Press the Tab key to select Enable Touchpad, and press Enter.
❑
Restart the computer to activate the touchpad again.
❑
If your touchpad is interpreting a single tap as a double-click, adjust the
button assignments. Follow these steps:
1 Press the Windows key, and press the Up Arrow
Programs. Press Enter.
2 Press the Down Arrow
Enter.
3 Make sure Sony Notebook Setup is selected, and press Enter.
4 Press the Right Arrow
Alt+S simultaneously.
5 Make sure the Buttons tab is open, and press the Up
Arrow
6 Press Enter to save your changes and close the dialog box.
❑
If you are still experiencing problems, check that another mouse was not
installed.
key to select Sony Notebook Setup, and press
key to select the Touchpad tab.
key to select Sony Notebook Setup, and press
key to select the Touchpad tab, and press
keys to change the button assignments.
Troubleshooting
key to select
key to select All
and Down
45