Table of Contents
Advertisement
SPECIALSETTINGS
Registeringthedevicewiththe
WLANrouterwithindividual
networksettings
These settings require advanced knowledge of
network configuration.
1 Press »MENU« to open the menu.
2 Select the option »System settings« with »
or »
« and press »OK« to confirm.
Λ
3 Select the option »Network« with »
»
« and press »OK« to confirm.
Λ
4 Select the option »Manual settings« with »
or »
« and press »OK« to confirm.
Λ
5 Select the option »Wired« or »Wireless« with
»
« or »
« and press »OK« to confirm.
V
Λ
6 Select the option »DHCP enable« or »DHCP
disable« with »
« or »
V
confirm.
Notes:
Setting »DHCP disable« means all address-
7
es must be entered manually.
If »DHCP enable« is set, the addresses are
7
automatically assigned by the router. If you
have selected »DHCP enable«, continue
with step 12.
7 Enter the IP address.
Select the first number with »
press »OK« to confirm.
Select the next digit position with » « (you
can switch back with » «).
Repeat the procedure for all characters.
Confirm the IP address by pressing »OK«.
8 Enter the Subwork mask.
Select the first number with »
press »OK« to confirm.
Select the next digit position with » « (you
can switch back with » «).
Repeat the procedure for all characters.
Confirm the number by pressing »OK«.
9 Enter the Gateway address.
Select the first number with »
press »OK« to confirm.
-----------------------------------------------------------------------------------------------------
V
« or
V
V
« and press »OK« to
Λ
« or »
« and
V
Λ
« or »
« and
V
Λ
« or »
« and
V
Λ
Select the next digit position with » « (you
can switch back with » «).
Repeat the procedure for all characters.
Confirm the number by pressing »OK«.
Note:
The primary and secondary DNS (Domain
7
Name System) are the network address of
«
the server allocated by the provider.
10 E nter the Primary DNS.
S elect the first number with »
press »OK« to confirm.
«
S elect the next digit position with » « (you
can switch back with » «).
R epeat the procedure for all characters.
Confirm the number by pressing »OK«.
11 E nter the Secondary DNS.
S elect the first number with »
press »OK« to confirm.
S elect the next digit position with » « (you
can switch back with » «).
R epeat the procedure for all characters.
Confirm the number by pressing »OK«.
Note:
The SSID (Service Set Identifier) is the
7
WLAN network code, and is used to iden-
tify this wireless network.
12 E nter the SSID:
E nter the first character with »
or » « and press »OK« to confirm.
Repeat entry for all other characters.
Once the network key has been entered
completely, press »
« to select the push button »
»OK« to confirm.
Notes:
Numbers, capital and lower case letters
7
and special characters are available for
input.
Scroll through the menu pages with »
7
»
« to select all other characters.
Λ
If you make a mistake during entry, press
7
»
«, »
«, » « or » « to select the push
V
Λ
←
button »
The last character is deleted.
« or »
V
« or »
V
«, »
V
Λ
«, »
«, » « or »
V
Λ
8
« and press
« and press »OK« to confirm.
ENGLISH
« and
Λ
« and
Λ
«, » «
« or
V
41
Advertisement
Table of Contents
