Gigabyte Z590 AORUS PRO AX User Manual page 29

& FAN/PUMP Stop
Enables or disables the fan/pump stop function. You can set the temperature limit using the temperature
curve. The fan or pump stops operation when the temperature is lower than the limit. (Default: Disabled)
& FAN/PUMP Mode
Allows you to set the operating mode for the fan.
Adjusts the fan speed linearly based on the temperature. (Default)
Slope
Adjusts the fan speed stepwise based on the temperature.
Stair
& FAN/PUMP Fail Warning
Allows the system to emit warning sound if the fan/pump is not connected or fails. Check the fan/pump
condition or fan/pump connection when this occurs. (Default: Disabled)
& Save Fan Profile
This function allows you to save the current settings to a profile. You can save the profile in the BIOS or
select Select File in HDD/FDD/USB to save the profile to your storage device.
& Load Fan Profile
This function allows you to load a previously saved BIOS profile without the hassles of reconfiguring
the BIOS settings. Or you can select Select File in HDD/FDD/USB to load a profile from your storage
device.
- 29 -