Audio Jack Configurations:
Jack
Center/Subwoofer Speaker Out
Rear Speaker Out
Line In/Side Speaker Out
Line Out/Front Speaker Out
Mic In
• If you want to install a Side Speaker, you need to retask the Line in jack to be Side Speaker out
through the audio driver.
• To enable or configure the audio amplifying function for the Line out jack, please access the
Realtek Audio Console application.
• When removing the cable connected to a back panel connector, first remove the cable from your
device and then remove it from the motherboard.
• When removing the cable, pull it straight out from the connector. Do not rock it side to side to
prevent an electrical short inside the cable connector.
Please visit GIGABYTE's website for details on configuring the audio software.
Headphone/
4-channel
2-channel
a
a
a
- 14 -
5.1-channel
7.1-channel
a
a
a
a
a
a
a
a