Table of Contents
Advertisement
3.23.2 Sport mode power saving options
To extend battery life while using sport modes with GPS, your
biggest gains come from adjusting GPS accuracy (see
accuracy and power saving ). To extend battery life further, you can
adjust use the following power saving options:
Display color: by default, the display uses the full range of colors
•
available. When you enable the Low color option, the display
uses fewer colors which reduces the amount of battery power
needed.
Display timeout: normally, the display is always on during your
•
exercise. When you turn on the display timeout, the display
turns off after 10 seconds to save battery power. Press any
button to turn the display back on.
To activate power saving options:
1. Before you start an exercise recording, swipe up or press the
lower button to open the sport mode options.
2. Scroll down to Power saving and tap the setting or press the
middle button.
3. Adjust the power saving options as you want and then swipe
right or keep the middle button pressed to exit the power saving
options.
4. Scroll back up to the start view and start your exercise as normal.
NOTE: If the display timeout is on, you can still get mobile
notifications as well as sound and vibration alerts. Other visual aids
such as the autopause pop-up are not shown.
3.12 GPS
59
Advertisement
Table of Contents
