SAS Controller Enable
JPS1 enables or disables the Adapt-
ec 9140W SAS controller on the
serverboard. See the table on the
right for jumper settings. The default
setting is enabled.
Compact Flash Master/
Slave
The JCF1 jumper allows you to as-
sign either master or slave status to
a compact fl ash card populating the
JIDE#2 slot . See the table on the
right for jumper settings.
SMB to PCI Slots
2
Jumpers JI
C1 and JI
the
connect
PCI-X/PCI-E slots to the
System Management Bus
setting is disabled. See the table on the
right for jumper settings.
5-10 Onboard Indicators
JLAN1/JLAN2 LEDs
The Ethernet ports (located beside the
VGA port) have two LEDs. On each
Gigabit LAN port, one LED indicates
activity while the other LED may be
green, amber or off to indicate the
speed of the connection.
table on the right for the functions
associated with the connection speed
LED.
Chapter 5: Advanced Serverboard Setup
2
C2 allow you to
.
The default
See the
5-21
SAS Controller Enable
Jumper Settings (JPS1)
Jumper Setting
Defi nition
Pins 1-2
Enabled
Pins 2-3
Disabled
Compact Flash
Master/Slave
Jumper Settings (JCF1)
Jumper Setting
Defi nition
Closed
Master
Open
Slave
SMBus to PCI
2
2
Jumper Settings (JI
C1, JI
C2)
Jumper Setting
Defi nition
Pins 1-2
Enabled
Open
Disabled
JLAN LED
Connection Speed Indicator
LED Color
Defi nition
Off
10 MHz
Green
100 MHz
Amber
1 GHz