Related Manuals for Trotec TCH 21 E
Summary of Contents for Trotec TCH 21 E
- Page 1 TCH 21 E / TCH 23 E OPERATING MANUAL CONVECTOR EN This product is only suitable for well insulated spaces or occasional use.
-
Page 2: Table Of Contents
This signal word indicates important information (e.g. without supervision. material damage), but does not indicate hazards. Info Information marked with this symbol helps you to carry out your tasks quickly and safely. convector TCH 21 E / TCH 23 E... - Page 3 • Insert the mains plug into a properly fused mains socket. • Observe the device's power input, cable length and intended use when selecting extensions to the power cable. Completely unroll extension cables. Avoid electrical overload. convector TCH 21 E / TCH 23 E...
- Page 4 Dangers can occur at the device when it is used by untrained people in an unprofessional or improper way! Observe the personnel qualifications! Warning The device is not a toy and does not belong in the hands of children. convector TCH 21 E / TCH 23 E...
-
Page 5: Information About The Device
The device will automatically be switched back on once it has been brought into the original upright position. Designation Carrying handle Control panel Foot Air inlet Air outlet Air outlet of fan (TCH 23 E only) convector TCH 21 E / TCH 23 E... -
Page 6: Transport And Storage
3. Slide the foot (3) into the correct position so that the holes prevent it from being damaged. in the foot (3) are aligned with the holes in the device. 4. Fasten each foot (3) with two screws. convector TCH 21 E / TCH 23 E... -
Page 7: Operation
• Make sure that no curtains or other objects interfere with the air flow. • Do not position the device directly below a wall socket. • Make sure that the device cannot come into contact with moisture or water. convector TCH 21 E / TCH 23 E... - Page 8 ð The device operates at heating level II. 4. In order to achieve the maximum heating performance, set the function selector switch (7) to position III. ð The device operates at heating level III. convector TCH 21 E / TCH 23 E...
-
Page 9: Errors And Faults
Trotec check the electrics and replace the overheating protection. • Wait for 10 minutes before restarting the device. If the device is not starting, have the electrics checked by a specialist company or by Trotec. convector TCH 21 E / TCH 23 E... -
Page 10: Technical Annex
(A): 50 cm 50 cm rear (B): 50 cm 50 cm sides (C): 50 cm 50 cm front (D): 50 cm 50 cm Weight 3 kg 3 kg convector TCH 21 E / TCH 23 E... - Page 11 Room temperature control, with open window detection With distance control option With adaptive start control With working time limitation With black bulb sensor Contact details Trotec GmbH Grebbener Straße 7 D-52525 Heinsberg NA: not applicable convector TCH 21 E / TCH 23 E...
-
Page 12: Disposal
TCH 21 E / TCH 23 E... - Page 13 Trotec GmbH Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...