Related Manuals for Trotec TCH 1510 E
Summary of Contents for Trotec TCH 1510 E
- Page 1 TCH 1510 E / TCH 2510 E OPERATING MANUAL CONVECTOR EN This product is only suitable for well insulated spaces or occasional use.
-
Page 2: Table Of Contents
Information marked with this symbol indicates that the involved. operating manual must be observed. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance. convector TCH 1510 E / TCH 2510 E... - Page 3 Risk of electric specifications in the Technical annex. shock! • Insert the mains plug into a properly fused mains socket. • Do not use the device any more once it has been dropped. convector TCH 1510 E / TCH 2510 E...
- Page 4 3. Do not reconnect a defective device to the mains. In order to avoid overheating and fire hazards, the heater must not be covered. convector TCH 1510 E / TCH 2510 E...
-
Page 5: Information About The Device
In addition, the device can alternatively be mounted on the Foot wall. Wall holder The functioning of the two devices is identical, the devices differ in heating capacity and dimensions. Air inlet On/off switch (operating control lamp) Control panel Air outlet convector TCH 1510 E / TCH 2510 E... -
Page 6: Transport And Storage
• Place no further devices or objects on top of the device to prevent it from being damaged. 3. Check the feet (1 for tight fit. 4. Set the device up in an upright and stable position. convector TCH 1510 E / TCH 2510 E... - Page 7 4. Hook the lower part of the device into the lower part of the holder. 5. Hook the device's upper part into the holder. 2. Drill the holes into the wall at the marked positions. convector TCH 1510 E / TCH 2510 E...
- Page 8 Technical annex. • Before restarting the device, check the condition of the power cable. If there are doubts as to the sound condition, contact the customer service. convector TCH 1510 E / TCH 2510 E...
-
Page 9: Operation
The control panel comes with a background illumination. The background illumination switches on as soon as the device is switched on. After approx. 5 s without any input, the background illumination switches back off. convector TCH 1510 E / TCH 2510 E... - Page 10 3. Press the OK button (11) to start the automatic mode. ð The room temperature display (8) now initially indicates the current room temperature. ð The device heats and the symbol (7) is displayed on the control panel. convector TCH 1510 E / TCH 2510 E...
- Page 11 ð The locking function is activated. ð The buttons on the control panel cannot be used. 3. Press the Mode button (14) again to switch the swing function off. ð The device switches back to the previous operating mode. convector TCH 1510 E / TCH 2510 E...
-
Page 12: Errors And Faults
Only then switch the device back on. The device still does not operate correctly after these checks: Please contact the customer service. If necessary, bring the device to an authorised specialist electrical company or to Trotec for repair. convector TCH 1510 E / TCH 2510 E... -
Page 13: Technical Annex
A: top: 100 cm 100 cm B: rear: 100 cm 100 cm C: side: 100 cm 100 cm D: front: 100 cm 100 cm Weight 3.5 kg 4 kg convector TCH 1510 E / TCH 2510 E... - Page 14 Room temperature control, with open window detection With distance control option With adaptive start control With working time limitation With black bulb sensor Contact details Trotec GmbH Grebbener Straße 7 D-52525 Heinsberg NA: not applicable convector TCH 1510 E / TCH 2510 E...
-
Page 15: Disposal
TCH 1510 E / TCH 2510 E... - Page 16 Trotec GmbH Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...