Function Settings; Outdoor Unit - Fujitsu AUXG22KVLA Design & Technical Manual

8. Function settings

To adjust the functions of this product according to the installation environment, various types of
function settings are available.
NOTE: Incorrect settings can cause a product malfunction.

8-1. Outdoor unit

¢ Control PCB and switch buttons location
Control PCB of the outdoor unit is located as shown in the following figure.
 Switch buttons and the functions
LED lamp
(1) POWER/MODE
(2) ERROR
(3) PUMP DOWN (L1)
LOW NOISE MODE
(4)
(L2 and L3)
PEAK CUT MODE
(5)
(L4, L5, and L6)
8-1. Outdoor unit
LED lamps
(1) (2) (3) (4)
S134 S133 S132
Switch buttons
Lights on while power on.
Green
Local setting in outdoor unit or error code is displayed with blink.
Red Blinks during error operation.
Orange Lights on during pump down operation.
Lights on during "Low noise mode" when local setting is activated.
Orange
(Lighting pattern of L2 and L3 indicates low noise level.)
Lights on during "Peak cut mode" when local setting is activated.
Orange
(Lighting pattern of L4, L5, and L6 indicates peak cut level.)
- 157 -
LED lamps
Switch buttons
(5)
S131 S130
Function or operation method
8. Function settings