Table of Contents
Advertisement
7 Set Channels
For the initial setup, the system will remind you
to select network connection or TV channel
installation. The Section provides the instructions
on how to reinstall and fine-tune channels.
Automatic Channel Searching
1. Press
key.
2. Select Channel > Channel Settings and then
press OK key.
3. Press OK key to begin automatic channel
searching.
Note
This function can be used only in TV
mode.
Manual Channel Setting
Step 1 Select System
1. Press
key.
2. Select Channel > Analog channel manual
installation.
3. Choose to begin scanning and fine-tuning.
Note
Frequency fine-tuning can be performed
only when the source is ATV.
Step 2 Search and Store New Channels
1. Press
key.
2. Select Channel > Analog channel manual
installation > Begin Scanning.
You can directly input the channel
frequency.
Choose to Scan and then press OK key
to begin scanning.
3. Upon searching completion, select Save to
quit the current interface.
Save the searched channels.
Step 3 ATV Fine Tuning
1. Press
key.
2. Select Channel > Analog channel manual
installation > Fine-tuning.
3. Select Decrease or Increase to adjust the
frequency.
Search Digital Channels
1. Press
key.
2. Select Channel > Digital channel manual
installation and then press OK key.
3. Directly input the channel frequency.
4. Choose Scan and then press OK key to
begin scanning.
16
EN
Advertisement
Table of Contents
