Bluetooth Streaming; Aux Input - Boss MC470B User Manual

A
: Connect the power cable harness. See the section "Power Source Connection" for complete
power connection instructions.
B
: Connect the speaker cable harnesses.
C
: Connect your mobile phone or MP3 player for audio input to the speakers, using an audio
cable (e.g. 3.5mm audio cable or 3.5mm audio input adapter).

Bluetooth Streaming

Before you can stream music from your mobile device (iOS device or Android device) to this product
through Bluetooth, pair this product with your mobile device.
1.
Power on the product (rotate the inline power/volume knob).
2.
On your mobile device, enable Bluetooth function and select the device name ("Boss Audio
MC470B" or "Boss Audio MCBK470B") to pair this product with the mobile phone.
If prompted for password input on your mobile device, input "0000".
Note: Only one device can be paired at a time.
3.
When successfully paired/connected, confirmation tone can be heard. Play audio on your
mobile device, and audio will be streamed to this product. Rotate the inline power/volume knob
to adjust volume.
After pairing, the product will be automatically connected to your mobile device each time the two
are turned on. To change Bluetooth source, disconnect the Bluetooth connection on the current
mobile device. Then repeat Step 2 above to pair/connect with another mobile device.
Operating this product consumes the vehicle battery. To avoid battery exhaustion, be sure
to run the vehicle engine when operating the product.
Operational range can be reduced by any obstacle between this product and the device.
If the connected device is out of the effective range from this product, the device will be
automatically disconnected. The device will be automatically re-connected if it is within the
effective range again.

AUX Input

You can listen to an external audio device (e.g. a mobile phone or MP3 player) through this product.
1.
Power on the product (rotate the inline power/volume knob), and make sure the product is not
connected to Bluetooth.
2.
Connect the 3.5mm audio input jack of the speaker to the audio output connector on your mobile
phone, using the following audio cable.
• For a mobile phone with 3.5mm headphone jack, use a 3.5mm audio cable (not included).
• For a mobile phone with a USB-C port, use a USB-C to 3.5 audio cable (not included).
• For an iPhone, use a lightning to 3.5 audio cable (not included).
- 6 -