Powersports plug and play audio system with weather proof 8 inch component speakers, built in 700 watt amplifier (4 pages)
Summary of Contents for Boss MC425BA
Page 2
Thank you for choosing our product! Please read the instructions carefully so you will know how to operate your product properly. If there are any technical questions, please contact: Customer care: (805) 751-4853 & Live chat Online support: www.bossaudio.com/support IMPORTANT Please enter below the Serial No.
Table of Contents Introduction ............................1 Package Contents ..........................1 Important ............................2 Mounting ............................. 3 Wiring ..............................4 Bluetooth Streaming ........................... 5 AUX Input ............................6 Troubleshooting ..........................7 Specifications ............................. 8 Introduction This product is a pair of speaker pods with a built-in amplifier. The product is designed to be installed on the handlebar of a motorcycle or cage bar of a UTV vehicle.
Important Read and understand all instructions before you use your product. If you do not follow the instructions in this manual, we are not responsible for any resulting personal injury or damage to property. This will also void the warranty. Important Safety Precautions •...
Mounting See the section “Installation Precautions” on page 2. Keep connection cables away from any pinch points, moving parts, or any hot exhausts. Do not install the speakers where they may obstruct the rider’s view or inhibit any safety features on the vehicle (e.g. lights, horns, brake levers, etc.). To ensure security of the mounted speakers, always check the mounting conditions (e.g.
Wiring See the section “Installation Precautions” on page 2. For safety, disconnect the negative terminal of the vehicle battery prior to wiring. Keep connection cables away from any pinch points, moving parts, or any hot exhausts. Secure the connected cables. Reconnect the negative terminal of the vehicle only when all wire connections are correctly and securely made.
Power on the product (rotate the inline function knob). The product will automatically switch to Bluetooth mode. On your mobile device, enable Bluetooth function and select the device name (“Boss Audio MC425BA”) to pair this product with the mobile phone.
When successfully paired/connected, confirmation tone can be heard. Play audio on your mobile device, and audio will be streamed to this product. Rotate the inline function knob to adjust volume. After pairing, the product will be automatically connected to your mobile device each time the two are turned on.
Troubleshooting If you have problems using this product, check the following points before you request service. If you still have a problem, contact our technical support. Problem Solution No power Check that power source connection is correctly or securely made. See the section “Power Source Connection” for details. Check that the power ON/OFF wires are correctly or securely connected.
Specifications Bluetooth Bluetooth version ......... 5.0 / EDR Bluetooth profiles ......... A2DP Bluetooth frequency ........2402 – 2480 MHz Transmission power........<4 dBm Transmission distance ......... up to 33 ft /10 m (line of sight) Audio Speaker driver ..........3” (76 mm) Speaker impedance ........
Page 12
Fit the speaker brackets around the handlebar of the desired installation location. Use the included Rubber Mounting Shims to secure the speaker brackets. rev 0922 *DISCLAIMER: Basic electrical knowledge and tools are required for the following steps. See the supplied user manual for complete power connection instructions.
Need help?
Do you have a question about the MC425BA and is the answer not in the manual?
Questions and answers