Wiring - Boss MC470B User Manual

Mounting the amplifier
You can secure the power amplifier in your vehicle using the supplied screws.
1.
Find a suitable location in the vehicle to mount the amplifier. Make sure there is sufficient air
circulation around the intended mounting location.
2.
Secure the amplifier as follows:
a.
Use the four screw holes on the amplifier to
mark the mounting holes on the mounting
surface.
b.
Drill the mounting holes in the mounting
surface.
c.
Place the amplifier in position, and attach
the amplifier to the mounting surface using
four supplied screws, spring washers and
plain washers.
Mounting the power/volume knob
Mount the power/volume knob in a safe, easy-to-access location where it will not impede the rider's
ability to drive safely. Secure the power/volume knob using the supplied zip tie

Wiring

See the section "Installation Precautions" on page 2.
For safety, disconnect the negative terminal of the vehicle battery prior to wiring.
Keep connection cables away from any pinch points, moving parts, or any hot exhausts.
Secure the connected cables.
Reconnect the negative terminal of the vehicle only when all wire connections are
correctly and securely made.
- 4 -
.