Table of Contents
Advertisement
Salt storage
CAUTION
• Use dishwasher-specific salt only. Do not use any other type of salt or solvent. This may
damage the salt storage and the water softening system.
• To prevent corrosion caused by an excessive amount of salt or salty water, always fill
the salt storage before a washing cycle gets started.
Filling the salt storage
Salt indicator
The indicator (
) turns on if there is not enough salt for the next several cycles.
Europe_DW8700B A-10_WEB_DW0002_English.indd 45
1. Open the door.
2. Turn the cap counterclockwise to open.
NOTE
When you open the softener lid, clean
water stored for about one minute may run
out. Add salt to stop the water from leaking
out.
3. Fill the salt storage with water (only
required when using the dishwasher for
the first time).
4. Apply dishwasher salt.
CAUTION
• The maximum capacity is about 1 kg. Do
not exceed the capacity.
• Exceeding the capacity may affect the
dishwasher performance.
5. Turn the cap clockwise to close.
NOTE
• To clean excess salt or salt water from
dishwasher, run the Express cycle.
• Depending on the size of the salt grains,
it may take a while for the salt to
dissolve and the indicator (
off.
) to turn
English
45
2023-07-27
6:12:58
Advertisement
Table of Contents
