Table of Contents
Advertisement
Installation
STEP 5 Level the dishwasher
For Built-In models
24
English
Europe_DW8700B A-10_WEB_DW0002_English.indd 24
7. This shows the completion of mounting
the custom panel.
You can adjust the height of the dishwasher
to level it. Note that in these steps, the
dishwasher is currently inserted halfway.
1. Use the level to check if the dishwasher
is level.
2. To adjust the front height, use a 22 mm
wrench.
• To lower the height, turn the foot
counter clockwise.
• To raise the height, turn the foot
clockwise.
3. To adjust the rear height, insert the Torx
T20 screwdriver in the bottom center of
the dishwasher.
• To lower the height, turn the
screwdriver clockwise.
• To raise the height, turn the screwdriver
counter clockwise.
4. When levelling is complete, check if the
door opens and closes properly.
2023-07-27
6:12:47
Advertisement
Table of Contents
