Disposal Of Packaging Materials; Description Of The Appliance; Technical Data - Silvercrest 373659 2104 Operating Instructions Manual

Disposal of packaging materials

The packaging protects the appliance from damage during transport . The pack-
aging materials have been selected for their environmental friendliness and ease
of disposal, and are therefore recyclable .
Returning the packaging into the material cycle conserves raw materials and
reduces the amount of waste generated . Dispose of packaging materials that
are no longer needed in accordance with applicable local regulations .
Dispose of the packaging in an environmentally friendly manner .
Note the labelling on the packaging and separate the packaging material
components for disposal if necessary . The packaging material is labelled with
abbreviations (a) and numbers (b) with the following meanings:
1–7: Plastics, 20–22: Paper and cardboard, 80–98: Composites .
NOTE
► If possible, keep the original packaging during the warranty period so that
the device can be properly packed for returning in the event of a warranty
claim .

Description of the appliance

Figure A:
1 Styling jet
2 Air intake grille
3 Sensor field
4 Hanger eye
5 Control lamp
6 Blower level switch (2 levels)
7 Heater level switch (3 levels)
8 Cold air button
Figure B:
9 Finger diffuser

Technical data

Mains voltage
Rated power
Protection class
SHTT 2200 B1
(Cool-Shot)
220 – 240 V ∼ (alternating current), 50/60 Hz
1900 – 2300 W
II / (double insulation)
GB │ MT │ 39 ■