Disassembly Process - Fujitsu AS G09LTCA Series Service Instruction

4-1-2 DISASSEMBLY PROCESS

1. Intake Grille Assy removal
Open the intake grille.
While holding the intake grille, lift up the grille stay and secure the intake grille.
Remove the screws from the arm-cover on the top part of the front panel.
(in 2 places, one on the left and one on the right).
Push down the arm-cover grips to release the lock.
Open the intake grille until it is horizontal, and pull it towards you to remove it.
2. Air Filter removal
Lift up the Air Filter's handle, disconnect the 2 lower tabs, and pull out.
Air Filter handle
Air Filter
Hooks
04-02
Intake grille
Arm-cover knob
Grille stay
Intake grille
Grille stay