Table of Contents
Advertisement
16.3 Remote Start
You can use the Home Connect app
to start the appliance with your mo-
bile device.
Tip: If you select "Permanent" in the
Basic settings → Page 41 of this
function, the function is permanently
activated and you can start your ap-
pliance with a mobile device at any
time.
Activating Remote Start
When you have selected "Manual" in
the basic settings of this function, ac-
tivate the function on your appliance.
Requirements
The appliance is connected to your
¡
WLAN home network.
The appliance is connected to the
¡
Home Connect app.
"Manual" is selected in the Basic
¡
settings → Page 41 of this function.
A programme is selected.
¡
Press
.
▶
If you open the appliance door, the
function is automatically deactiv-
ated.
button lights up.
a
Tip: To deactivate the function, press
.
16.4 Remote Diagnostics
Customer Service can use Remote
Diagnostics to access your appliance
if you contact them, have your appli-
ance connected to the Home Con-
nect server and if Remote Dia-
gnostics is available in the country in
which you are using the appliance.
Tip: For further information and de-
tails about the availability of Remote
Diagnostics in your country, please
visit the service/support section of
your local website: www.home-con-
nect.com.
16.5 Software update
You can use this function to update
the software of your appliance, e.g.
for optimisation, troubleshooting or
safety-relevant updating.
The Home Connect app informs you
about available software updates.
16.6 Data protection
Please see the information on data
protection.
The first time your appliance is
registered on a home network
connected to the Internet, your
appliance will transmit the following
types of data to the Home Connect
server (initial registration):
Unique appliance identification
¡
(consisting of appliance codes as
well as the MAC address of the
Wi-Fi communication module in-
stalled).
Security certificate of the Wi-Fi
¡
communication module (to ensure
a secure data connection).
The current software and hardware
¡
version of your appliance.
Status of any previous reset to
¡
factory settings.
This initial registration prepares the
Home Connect functions for use and
is only required when you want to
use the Home Connect functions for
the first time.
Note: Please note that the
Home Connect functions can only be
utilised with the Home Connect app.
Information on data protection can be
retrieved in the Home Connect app.
Home Connect aus
43
Advertisement
Table of Contents
