Table of Contents
Advertisement
Fault
E:6103 lights up. Wa-
ter is not drained.
E:9001 lights up.
E:9240 lights up.
Cause and troubleshooting
Not an appliance fault. Siphon connection is still
closed or the wastewater hose is kinked or blocked.
Check the connection to the siphon and open if ne-
1.
cessary.
Install wastewater hose without kinks.
2.
Remove residues.
3.
Not an appliance fault. Wastewater pump is blocked
or the cover of the wastewater pump is loose.
Clean the wastewater pump.
1.
→ "Clean wastewater pump", Page 62
Secure the cover of the wastewater pump so it
2.
clicks into position.
→ "Clean wastewater pump", Page 62
Mains voltage is too low.
This is not a fault on the appliance.
Contact an electrician.
1.
Have the mains voltage and electrical installation
2.
checked by an electrician.
Filters are soiled or blocked.
Clean the filters.
▶
→ "Cleaning filters", Page 45
Troubleshooting aus
51
Advertisement
Table of Contents
