Table of Contents
Advertisement
aus Troubleshooting
Fault
Remnants of food on
tableware.
54
Cause and troubleshooting
Filters are soiled.
Clean the filters.
▶
→ "Cleaning filters", Page 45
Filters are inserted incorrectly and/or not engaged.
Insert the filters properly.
1.
→ "Filter system", Page 45
Engage the filters.
2.
Washing programme selected too weak.
Select a more intensive washing programme.
▶
Adjust the sensitivity of the sensors.
▶
→ "Sensors", Page 12
Tableware has been precleaned too intensely. The
sensors chose a weaker programme. Stubborn soiling
cannot be entirely removed.
Only remove large remnants of food and do not
▶
prerinse tableware.
Adjust the sensitivity of the sensors.
▶
→ "Sensors", Page 12
Tall narrow receptacles in corner areas are not rinsed
adequately.
Do not position tall narrow receptacles at too great
▶
an angle or in corner areas.
Top baskets on right and left are not set to same
height.
Set the upper basket on the left and right to the
▶
same height.
→ "Top basket", Page 24
Advertisement
Table of Contents
