Table of Contents
Advertisement
en Installation and connection
During the drying phase moisture
from the interior of the dishwasher is
stored in the mineral and heat energy
is released. The heat energy is blown
out into the interior of the dishwasher
with dry air. This speeds up and im-
proves drying.
Zeolith drying therefore saves a great
deal of energy.
Tip: To avoid impairing Zeolith drying
performance, do not position table-
ware parts directly in front of the in-
take opening or the blow opening of
the Zeolith container.
Do not position heat-sensitive table-
ware parts directly in front of the blow
opening of the Zeolith container.
→ "Appliance", Page 15
4.4 Sensors
The sensors adjust the programme
sequence and strength in the auto-
matic programmes depending on the
level and type of soiling.
The sensor has different sensitivity
settings that can be changed in the
basic settings.
→ "Changing basic settings",
Page 40
Sensor set-
ting
SE:00
SE:01
12
Description
Optimum setting for
a mixed load and
heavily soiled table-
ware. Saves both en-
ergy and water.
Adjusts the pro-
gramme strength for
effective removal of
food remnants even
with low soiling
levels. Energy and
water consumption
are adjusted accord-
ingly.
Sensor set-
ting
SE:02
5 Installation and con-
nection
To ensure proper operation, connect
the appliance to the power and water
supply correctly. Observe the spe-
cified criteria and the installation in-
structions.
5.1 Scope of supply
After unpacking all parts, check for
any damage in transit and complete-
ness of the delivery.
If you have any complaints, contact
the dealer who sold you the appli-
ance or our Customer Service.
Note: The appliance has been tested
at the factory to check it is in working
order. It is possible that water has left
marks on the appliance. These
marks will disappear after the first
wash cycle.
The delivery consists of the following:
Dishwasher
¡
Operating instructions
¡
Installation Instructions
¡
Further information documents
¡
Description
Adjusts the pro-
gramme strength for
difficult conditions of
use, e.g. stubborn
dried-on food rem-
nants. Recommen-
ded setting when us-
ing organic or ecolo-
gical detergents con-
taining low levels of
active agents. En-
ergy and water con-
sumption are adjus-
ted accordingly.
Advertisement
Table of Contents
