Table Of Contents; Introduction - Husqvarna K 540i Operator's Manual

Introduction..................................................................... 2
Safety..............................................................................5
Assembly...................................................................... 12
Operation...................................................................... 17
Maintenance................................................................. 25
Service..........................................................................28
Product description
The power cutter is a portable handheld cut-off machine.
The product is energized by a battery.
The product can be used for wet and dry operations.
Wet cutting on page 23 and Dry cutting on
Refer to
page 24 .
The product has embedded connectivity. Refer to
Embedded connectivity on page 4 .
Intended use
The product is used to cut hard materials as concrete,
masonry, stone and steel. Do not use the product
2
Contents
Troubleshooting............................................................ 28
Transportation, storage and disposal........................... 30
Technical data.............................................................. 31
Accessories.................................................................. 32
Declaration of Conformity............................................. 33
Registered trademarks................................................. 35

Introduction

for other tasks. The product must only be used by
professional operators with experience.
Work is constantly in progress to increase your safety
and efficiency during operation. Speak to your servicing
dealer for more information.
Note:
National/Local regulations could restrict the use
of this product.
1960 - 002 - 25.08.2023