Envirovent HEATSAVA Installation Manual page 10

Box Contents
• 1x heatSava unit
• 1x Heat Cell
• 1x Instructions Guide
• 1x SELV Box
• 1x Halo (Wall Kit Contents)
• 1x Wall Seal
Installation
Clearance - Walls
When core drilling into an existing wall, make sure you have enough
space to move around and distance between the wall and any objects
nearby i.e cupboards.
Ensure the unit is sited in a suitable position for adequate clearance
on all sides for easy access to the unit for maintenance purposes
and to ensure that access to the release clips on the front cover is
not inhibited.
The heatSava should not be installed in the corner of a room to
prevent the short circuiting of airflows.
The supply airflow is provided to the right side of the unit, and should
this be blocked then the heatSava will not run as intended.
9
heatSava
• 1x Fixing Template
• 1x Fixing Kit
• 10x Screws 8G x 2.0"
• 10x Red Wall Plugs
• 1x Terminal Block (Spare)
• 4x Screws 6G x 5/8"
SHOULD YOU ENCOUNTER ANY PROBLEMS
INSTALLING THIS UNIT, CALL US ON:
01423 810 810