Sharp HT-SB500 Operation Manual page 15

Speaker connections to TVs (continued)
Connecting to a TV
If the TV/monitor has an audio output, connect it to the LINE IN
1 jacks on the rear of the speaker.
To select LINE IN 1 function:
On speaker: Press FUNCTION button repeatedly until "L1" is
displayed.
On remote control: Press LINE 1-2 button repeatedly until
"L1" is displayed.
TV
RCA cable (supplied)
Speaker
To audio output jacks
To LINE IN 1
jacks
Connecting to a TV (with Headphone jack)
If the TV/monitor has headphone jack, connect it to the LINE IN
2 jack on the rear of the speaker.
To select LINE IN 2 function:
On speaker: Press FUNCTION button repeatedly until "L2" is
displayed.
On remote control: Press LINE 1-2 button repeatedly until
"L2" is displayed.
TV
Audio cable (not supplied)
Speaker
Notes:
If the TV volume is continuously in low level, the speaker will
automatically power off. Increase the TV output volume to
enjoy the sound from the speaker.
If the speaker volume is continuously in very high level, the
speaker will mute and recover after several seconds.
The information display on the sound bar system will not
display anything when increasing or decreasing the volume
level.
HEADPHONE
To HEADPHONE jack
To AUDIO LINE
IN 2 jack
HT-SB500
15