Light Bulb Replacement; Fuse Replacement - Cushman 623526-H Owner's Manual

MAINTENANCE
Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.

LIGHT BULB REPLACEMENT

To reduce the possibility of premature bulb failure, do not touch new bulbs with bare fingers. Use clean, dry tissue or
paper towel to handle the glass portion of the bulb.
For vehicles equipped with lights mounted in the
cowl, locate bulb socket on backside of light and
turn bulb socket a quarter turn counterclockwise to
unlock and pull out bulb and socket. Insert new bulb
5
and rotate socket a quarter turn clockwise to
secure.
Similarly replace the turn signal light bulb, locate
bulb socket on backside of light bar and turn bulb
socket a quarter turn counterclockwise to unlock
and pull out bulb and socket. Insert new bulb and
rotate socket a quarter turn clockwise to secure.
To replace the tail and brake light bulb, remove hardware securing lens
and remove lens. Install replacement bulb, then secure the lens with the
hardware.

FUSE REPLACEMENT

To replace fuses, locate the fuse block under the driver side seat. Pull out old fuse and replace with a new automo-
tive type fuse. Headlight and taillight bulbs and fuses are available from a local Distributor, an authorized Branch or
the Service Parts Department.
5 - 8
Inside
of Cowl
Headlight
Casing
Screw
Headlight
Bulb
Rear
Fender
Tail Light
Lens
Tail Light
Bulb