Table of Contents
Advertisement
Listing Label
AWAY. SEE NAMEPLATE AND INSTRUCTIONS. DO NOT OVERFIRE. IF HEATER OR CHIMNEY CONNECTOR
GLOWS, YOU ARE OVERFIRING. INSPECT AND CLEAN CHIMNEY AND CONNECTOR FREQUENTLY.
UNDER CERTAIN CONDITIONS OF USE, CREOSOTE BUILDUP MAY OCCUR RAPIDLY. DO NOT USE GRATE
OR ELEVATE FIRE. BUILD FIRE DIRECTLY ON HEARTH. OPERATE ONLY WITH FIREBRICK IN PLACE.
OPERATE ONLY WITH DOOR CLOSED. OPEN FEED DOORS TO FEED FIRE ONLY. USE OF OTHER FUELS
MAY DAMAGE THE HEATER AND CREATE A HAZARDOUS CONDITION.
CONTACT LOCAL BUILDING OR FIRE OFFICIALS ABOUT INSTALLATION AND RESTRICTIONS IN YOUR AREA.
CM
Report No. B0496PRT-001
Control No. 4000515
MANTEL
D
A
INSERT
F
E
HEARTH
Factory-Built (Z.C.) Fireplace installations require a minimum 24" starter section directly connected to the fireplace chimney or a full re-line.
Factory-Built (Z.C.) Fireplace chimney must have a minimum cross-sectional area of 28.85 square inches. The Factory-Built (Z.C.) Fireplace
damper and control must be removed, or secured in the open position. For minimum Factory-Built (Z.C.) Fireplace firebox size, see manufacturer's
installation instructions. Factory-Built (Z.C.) Fireplace floor protection must be 3/8" minimum non-combustible material or equivalent, extending
16" in front of insert and 8" to both sides. A metal deflector plate must be installed if the flue collar is not completely behind the Lintel plate of the
Factory-Built (Z.C.) Fireplace openings.
PREVENT HOUSE FIRES - Install and use only in accordance with the manufacturer's installation and operating instructions. Contact your local
building or fire officials about restrictions and installation inspection in your area. Do not connect this unit to a chimney flue serving another
appliance.
Electrical Rating:
115V., 60 Hz, 1.8 Amps
Optional Blower:
# 99000128
Do not route power cord under or in front of appliance.
Replace glass only with 5mm neoceramic or
ceramic glass.
2010
Made in U.S.A.
© Travis Industries
Listing Information
HOT WHILE IN OPERATION. DO NOT TOUCH. CONTACT MAY CAUSE SKIN BURNS.
KEEP FURNISHINGS AND COMBUSTIBLE MATERIAL A CONSIDERABLE DISTANCE
DO NOT REMOVE THIS LABEL
SUITABLE FOR USE IN FACTORY-BUILT (Z.C.) FIREPLACES AND MASONRY FIREPLACES.
Tested to: UL 1482 and ULC S628-93
FACTORY-BUILT (Z.C.) FIREPLACE OR MASONRY FIREPLACE INSTALLATION
C
B
NON-COMBUSTIBLE
EXTENSION
FIREPLACE FACING
U.S. ENVIRONMENTAL PROTECTION AGENCY
Certified to comply with July 1990 particulate emission standards.
2011
2012
2013
Jan
Feb
MODEL:
1750 INSERT
Certified for USA and Canada
Minimum Clearance to
Combustibles and Hearth
Requirements
With Shield
With Shield
E. (US)
E.(Can)
F. (US)
F. (Can)
DATE OF MANUFACTURE
Mar
Apr
May
Jun
Jul
Aug
100-01234
TYPE OF FUEL: SOLID WOOD ONLY.
SERIAL NO:
Factory-Built
Masonry
(Z.C.) Fireplace
Fireplace
Installations
Installations
30.0 in. (762 mm)
A.
15.0 in. (381 mm)
12.0 in. (305 mm)
B.
13.0 in. (331 mm)
12.0 in. (305 mm)
C.
28.5 in. (724 mm)
20.5 in. (521 mm)
24.0 in. (610 mm)
D.
30.5 in. (775 mm)
22.5 in. (572 mm)
16.0 in. (407 mm)
16.0 in. (407 mm)
18.0 in. (458 mm)
18.0 in. (458 mm)
6.0 in. (153 mm)
6.0 in. (153 mm)
8.0 in. (204 mm)
8.0 in. (204 mm)
Manufactured by:
TRAVIS INDUSTRIES, INC.
4800 Harbour Pointe Blvd. SW
Mukilteo, WA 98275
www.travisproducts.com
Sep
Oct
Nov
Dec
31
N/A
N/A
0937
4101210
Advertisement
Table of Contents
