Pro-Form PFTL87720-INT.0 User Manual page 10

6. Identify the Left and Right Handrails (80, 81).
Attach the Right Handrail to the Right Upright
(86) with two 5/16" x 2 1/4" Screws (7) and two
5/16" Star Washers (12) in the location shown;
start both Screws, and then tighten them.
Make sure not to pinch the Upright Wire (88),
and make sure that the wire is on the indi-
cated side of the Right Upright.
Attach the Left Handrail (80) to the Left
Upright (85) in the same way. Note: There are
no wires on the left side.
Then, remove and discard the indicated
screws (E).
7. Set the console assembly (F) face down on a
soft surface to avoid scratching the console
assembly. Attach the Right and Left Trays
(99, 98) with eight #8 x 1/2" Screws (5); start all
eight Screws, and then tighten them. Do not
overtighten the Screws.
Remove and save the four 1/4" x 1/2"
Screws (24).
6
7
12
E
80
7
5
99
24
F
10
7
85
12
E
81
88
5
5
98
86
5
24