38
VAIO Digital Studio™ Reference Manual
Removing a Memory Module
You may need to remove a memory module if you change the memory
configuration or replace a bad module.
!
Before opening the system unit, save any open files, exit the Windows
operating system, turn off the power of the computer and all attached
peripherals, and then unplug the power cord.
1
Remove the cover (see
2
Locate the memory module you wish to remove.
The memory modules are located beneath the power supply. You do not have to remove
the power supply to reach the memory modules.
3
Reach around each side of the power supply and push down the
handle on each side of the memory module to eject the module from
its socket.
"Removing the Cover"
Push out
Handles
®
on page 22).
KY0073.VSD
KY0042.VSD