Breville AquaStation Hot Instruction Book page 17

Ambient Water in Operation
- Without setting volume
1. Press the START/STOP button to instantly
dispense filtered ambient water. Press
START/STOP button once more to stop
dispensing water.
NOTE
If the START/STOP button is not pressed a
second time to stop dispensing water, the unit
will automatically stop after 60 seconds.
NOTE
Always ensure the correct sized cup/glass is
placed under the spout to collect the selected
volume of dispensed water.
Ambient Water in Operation
- When setting volume
1. Rotate the FUNCTION dial clockwise/anti-
clockwise for the default volume to appear
on the LCD screen; the 250ml default
volume will flash on the screen. Rotate the
FUNCTION dial clockwise or anticlockwise
to adjust the volume, then press the dial to
confirm the selection.
2. Press START/STOP button once to start
dispensing filtered ambient water at
the set volume. AMBIENT will flash on
the LCD screen, the water droplet light
will illuminate white to indicate water is
dispensing, and the FUNCTION dial light
will turn off.
3. Water will automatically stop dispensing
once the set volume has been reached and
the water droplet light will turn off. The will
return to standby mode.
Hot Menu - Black Tea, Coffee,
White Tea & Green Tea
1. Press the HOT water button once; the red
light around the HOT button will illuminate
and HOT will display on the screen. The hot
beverage programmed menu will appear on
the screen with the indicator beside the first
menu option. The default temp and volume
will appear on the LCD screen.
NOTE
The water droplet white light will flash until
START/STOP is pressed to start dispensing.
2. Turn the FUNCTON dial to scroll through
the pre-set menu options. The top digits
on the LCD screen indicate the hot water
temperature and the bottom digits indicate
the volume for the menu option chosen.
3. Press START/STOP button once to
dispense at the default volume (250ml), or
to adjust volume, press the FUNCTION dial
once. The Volume digits on the LCD screen
will begin to flash. Rotate the FUNCTION
dial clockwise or anticlockwise to adjust the
volume, then press the dial to confirm the
selection.
4. Press START/STOP button once to begin
dispensing the filtered hot water at the set
temp and volume. The red light around the
HOT button will be remain on, the selected
menu option and the word HOT will flash
on the LCD screen. The water droplet white
light will illuminate solid while water is
dispensing.
5. Water will automatically stop dispensing
once the set volume has been reached. The
red light around the HOT button and the
water droplet light will both turn off. The
will return to standby mode.
17