Features - Breville AquaStation Hot Instruction Book

Features

WHAT IS THE AQUASTATION™ HOT?
The Breville AquaStation™ Hot when used
with the Active360™ 4-stage fast flow water
filtration system, provides cleaner, great tasting
ambient or hot filtered water.
4 distinct levels of filtration, removes
contaminants from water that can cause bad
taste and odour, which may potentially be
harmful to your health.
1. Stage 1- Pre-Sediment Mesh Filter
Filters microplastics and floating particles
2. Stage 2- Ion-Exchange Resin Filter
Filters limescale and metals
3. Stage 3- Activated Carbon Filter
Filters Pesticides and Chlorine
4. Stage 4- Post Filter
Filters fine particles
* 4-stage fast flow filtration tested and/or
certified to remove/reduce microplastics,
floating particles/sediment, pesticides, chlorine,
limescale & heavy metals.
For more information, visit Breville.com
No Plumber Required
The unit will start to work as soon as
assembled, water added and connected to a
power source; then simply press to dispense
filtered water. No need to plumb into mains
water.
Filter Life Counter
The AquaStation™ Hot reminds you to replace
the filter every 90 days or approximately 200L
of water*, whichever comes first, to ensure the
best filtration performance.
You may choose to change your filter more
frequently in areas with poor water quality.
Filter Reset Replacement Alert
FILTER RESET will flash on the screen to
indicate when it is time to change the filter.
Once the filter is replaced, reset the filter time
to start the filter life countdown.
*The filter change alert is set at 90 days or
approximately 200L of water, whichever
comes first, with performance based on typical
municipal drinking water quality, however,
water quality may vary considerably from one
area to the next which may affect the life of the
water filter and more frequent replacement may
be required.
Last Setting Memory
The will return to the last used default hot
beverage menu selected.
CUSTOM setting will return to the last set
temp and volume unless the power is turned
off.
Removable & Magnetic Drip Tray
The drip tray can easily be removed to
accommodate different sizes of cups and
bottles. The magnetic edge helps to keep the
tray in place. Empty regularly to avoid overspill.
Water Level Sensor
The water tank is equipped with a floating
sensor which will automatically stop
dispensing when the water level becomes too
low and the Fill Tank indicator will illuminate.
One-way Tank Valve
The water tank has been designed with a one-
way valve so that it can be removed from the
even if water is still in the tank. This prevents
the water from leaking when removed from the
dispensing unit. Be mindful however that there
may be some residual water droplets when
removed from the base of the unit.
11