Contents 1 Important safety instructions Hearing safety General information 2 Your True wireless earpieces What's in the box Other devices Overview of your True wireless earpieces 3 Get started Charge the battery How to wear App download Pair for the �rst time Pair with another Bluetooth device 8 4 Use your earpieces Connect to your Bluetooth device...
1 Important General information safety To avoid damage or malfunction: instructions Caution Do not expose headphones to excessive heat. Do not drop your headphones. Hearing safety Headphones shall not be exposed to dripping or splashing. (Refer to the IP rating of speci�c product) ...
Page 4
To avoid risk of �re, the equipment is supplied only by external power source which output shall comply with PS1 (with output capacity less than 15W). Operating and storage temperatures and humidity • Store in a place where the temperature is between -20°C (-4°F) and 50°C (122 °F) with up to 90% relative humidity.
2 Your True wireless earpieces Quick start guide Congratulations on your purchase, and welcome to Philips! To fully bene�t from the support that Philips offers, register your product at www.philips.com/support. Warranty With these Philips True wireless earpieces you can: •...
Page 6
Overview of your Bluetooth wireless headphones Multi-function button (MFB) LED indicator (earpieces) Bluetooth pair button LED indicator (battery state or charging state) USB-C charging slot...
3 Get started Earpieces Place the earpieces in the charging box. • The earpieces start charging and the Charge the battery white LED light goes on • When the earpieces are fully charged, the white light will go off Note ...
4 sizes of silicone ear tips are provided : extra large, large, medium, small. The Philips Headphones App puts you in charge of the music you are listening to. You can customize the sound so that your music and calling experience always best suit your needs.
Bluetooth device. Turn on the Bluetooth function of your Bluetooth device, select Note Philips TAT6908. The earpieces store 4 devices in the memory. If you try to pair more than 4 devices, the earliest Enter the earpieces' password “0000”...
4 Use your Control ANC (Active Noise earpieces Cancelation) Different ANC modes can be toggled via Connect the earpieces to single pressing on the left earpiece. your Bluetooth device • ANC function is automatically activated when earpiece is placed in the ear.
Different hearable modes can be toggied Music control via long pressing on the left earpiece. My hearing mode will be activated after Task Operation taking the hearing test in Philips app. Play or pause Right Single press earpiece music Next track...
Earpieces LED indicator In use and cover Indicator is open status Battery low White LED slowly blinks for 3 cycles Earpieces status Indicator Relatively Off The earpieces are White LED blinks adequate battery connected to a once Bluetooth device The earpieces are The LED �ashes ready for pairing blue and white...
On your Bluetooth device, go to the Charging time: 2 hours Bluetooth menu and remove Philips Lithium-ion battery 63 mAh on TAT6908 from the device list. each earpiece, Lithium-ion battery 740 mAh on charging box Turn off the Bluetooth function of Bluetooth version: 5.3...
We strongly advise you to take your product to an official collection point or a Philips service centre to have a professional remove the rechargeable battery. Inform yourself about the local...
if not installed and used in accordance Compliance with EMF with the instruction manual, may cause harmful interference to radio This product complies with all communications. applicable standards and regulations However, there is no guarantee that regarding exposure to electromagnetic interference will not occur in a particular �elds.
Page 16
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) L’appareil ne doit pas produire de brouillage; (2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en...
8 Trademarks Bluetooth The Bluetooth word mark and logos are ® registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by MMD Hong Kong Holding Limited is under license. Other trademarks and trade names are those of their respective owners.
(see ‘Technical data’ on page 12). connected Bluetooth devices. • On your Bluetooth device, delete Clean your headphones regularly. “Philips TAT6908” from the Bluetooth • Use a clean, damp cloth to clean your list. headphones - especially the sound •...
Page 19
Charge your headphones regularly. If the headset is not used for a long time, the rechargeable battery will begin to lose its charge. To avoid this loss, please fully charge the battery at least once every three months.
Page 20
Speci�cations are subject to change without notice. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited or one of its affiliates, and MMD Hong Kong Holding Limited is the warrantor in relation to this product.