Use Your Earpieces; Connect To Your Bluetooth Device; Control Anc (Active Noise Cancelation) - Philips TAT6908 User Manual

4 Use your
earpieces
Connect the earpieces to
your Bluetooth device
1
Turn on the Bluetooth function of
your Bluetooth device.
2
Open the charging box cover.
The blue LED �ashes.
The earpieces will search the last
connected Bluetooth device and
reconnect to it automatically. If
the last connected one is not
available, the earpieces will enter
pairing mode for 3 minutes , if no
connection, the earpieces will
power off.
Tip
 If you turn on the Bluetooth function of your
Bluetooth device after turning on the earpieces,
you have to go to the Bluetooth menu of the
device and connect the earpieces to the device
manually.
Note
 In some Bluetooth devices, connection may not
be automatic. In this case, you have to go to the
Bluetooth menu of your device and connect the
earpieces to the Bluetooth device manually.
Control ANC (Active Noise
Cancelation)
Different ANC modes can be toggled via
single pressing on the left earpiece.
• ANC function is automatically
activated when earpiece is placed in
the ear.
• Press the MFB once, it will turn the
ANC function off.
• Press the MFB once again, it will
change to awareness mode.
ANC ON
ANC OFF
Task MFB
ANC ON Left
earpiece
ANC OFF Left
earpiece
Awareness Left
mode earpiece
Awareness
mode
Operation
Single press
Single press
Single press
9 EN