Lancom GS-3528X Installation Manual page 17

LANCOM Installation Guide – Configuration
this. You scan the serial number either on the underside of the device or
alternatively from the barcode on the packaging box. Otherwise, you can
enter the serial number manually.
Next, scan the cloud PIN from the information sheet enclosed with the
device. Here, too, you have the option of entering the PIN manually.
Now you can select one of the locations available in the project, or
optionally use No location to leave this item open. Bear in mind that the
location is an important setting for the configuration by SDN (Software-
defined Networking).
In the next step, you assign various properties to the device. You give the
device a name, enter an address, and take a photo of the installation. The
address can be determined with the GPS information from your device.
In the final step, the information is displayed once again for checking. If
you find any errors, simply go back and correct the corresponding entry.
Click or tap add device to pair the device with the LMC. You will immedi-
ately see it in your project and can make other settings if necessary. As
soon as you connect the device and it connects with the LMC, it is provi-
sioned with an initial operating configuration based on the SDN settings,
and the status changes to "online".
17