Display Setup - Kenwood KW-M875BW Quick Start Manual

Ñ
Software Information
You can confirm the software version of this
unit.
1
Touch [Software Information] in the
Special screen.
2
Confirm the software version.
NOTE
• For how to update the software, see the relevant
update procedure manual which comes with the
software.

Display Setup

1
Press the [FNC] button.
h Popup menu appears. h
2
Touch [
].
h HOME screen appears.
h
3
Touch [
].
h SETUP screen appears.
h
4
Touch [Display].
h Display screen appears. h
5
Set each parameter as follows.
■ [Dimmer]
Select the dimmer mode.
[OFF]: Does not dim the display.
[ON]: Dims the display.
[SYNC] (Default): Turns the dimmer function
on or off when the vehicle light control
switch is turned on or off.
[OSD Clock]
■
Select if you want to display the clock while
the screen is off, or while watching video
files, etc.
"ON" (Default)/"OFF"
[Wallpaper Customize]
■
You can change the wallpaper image or
color. (P.67)
[Viewing Angle]
■
If it is hard to see the image on the screen
evenly, adjust the viewing angle. The smaller
the (negative) value, the more whitish the
image on the screen looks.
"0" (Default)/"-1"/"-2"/"-3"
[Screen transition effect]
■
Select whether to use the screen transition
effect when the source control screen is
switched to the Home screen.
"ON" (Default)/ "OFF"
Ñ
Change the wallpaper image
1
Touch [Wallpaper Customize] on the
Display screen.
2
Select an image from live or static
wallpapers.
* Select a wallpaper color in advance.
1
* Select an original image in advance.
2
Setup
* *
1 2
67
English