Cleaning And Maintenance Instructions; Manual Washing - Beko 01M-8864613200-0818-02 User Manual

Cleaning and maintenance instructions

4
• WARNING!
• Before each maintenance and cleaning
operation, the cooker hood must be turned off
and the appliance must be disconected from the
power source.
• Cleaning and maintenance of the appliance
must not be performed by unattended children.
• Aggressive cleaning or abrasive cleaning
products may damage the surface. Never
use aggressive or abrasive cleaning agents.
Purchase the appropriate cleaning and
protection products for your device from the
Authorized Technical Service. The surface of
the machine and the control units are scratch-
sensitive.
• Clean the surfaces with a soft, damp cloth,
dishwashing detergent or non-aggressive glass
cleaner. Remove any hardened residues using a
damp cloth. Do not scratch!
• Use of dry cloths, abrasive sponges, friction
products and other cleaning agents containing
sand, soda, acid or chlorine is not appropriate.
• Clean the stainless steel surfaces in the original
furbishing direction.
• Do not use cleaning agents for stainless steel
and wet cloths on control units.
• Cleaning the grease filters - The used metal
grease filters capture the fat particles from
the moist air and the steam generated in the
kitchen. Under normal conditions of use (1-2
hours a day), cleaning the grease filters should
be performed approximately every three
months.
• Do not use excessively strong cleaning agents,
alkalis or acids.
• When cleaning the grease filters, also clean the
metal grease filter clamps in the appliance with
a damp cloth.
Cooker Hood / User Manual
4.1 Washing the grease filters
in the dishwasher
• You can wash the grease filters in the
dishwasher or by hand.
• When washing the filters in the washing
machine, their color may change slightly. This
does not affect the function of the grease
filters.
• Do not wash the highly dirty metal grease filters
together with other dishes.
• Place the grease filters in the dishwasher
without cluttering them.

4.2 Manual Washing

• You can use a special grease solvent to eliminate
persistent dirt. This type of solvent can be
purchased from an authorized sales center.
• Wipe the grease filters in hot water with
dishwashing detergent.
• Use a cleaning brush and wait for the liquid on
the metal grease filters to drain completely.
• Rinse the filters thoroughly after cleaning.
WARNING: Cleaning the metal
A
grease filter in due time, helps
avoiding the risk of fire caused by
the excessive heat generated during
frying.
4.3 Removing / installing the
aluminum filter
Pull the aluminum filter towards you by pressing
the corresponding button. Reverse the process to
install the filter.
13 / EN