Setting A Password - Kanguru Defender SSD User Manual

3.3.5 Setting a Password

From the Set Password screen:
1. Enter your password in the Password data field. You can enter your password using KDM's Virtual
Keyboard by clicking the VK button. For more information on using the Virtual Keyboard
section 3.4.2 Using the Virtual Keyboard to Enter Your Password on page
Note: For security reasons, it is recommended that you incorporate letters, numbers and symbols
to achieve maximum security.
2. Enter the same password in the Confirm Password field for verification. If your passwords do not
match or there is any other issue with the password which you have entered in the Set Password
section, an explanation will be visible in the Password Info window.
Note: The Password Info window will inform you if there are any password requirements. It
updates in real time. Disregard the messages in the Password Info box until you have finished
entering your password into both the Password and Confirm Password fields.
3. Click on the Apply button to set your password. Once the password has been set, click on the Next
button.
Congratulations! Your device is now set up and ready for use. Click on the Finish button to complete
the Setup Wizard and start using your device.
15
Setting a Password
see
18.