Washing - LG Tromm FR46C5MCNH Owner's Manual

• Do no use tissue (paper) type detergent or fabric
softener. Injection hole can get clogged, causing
leakages or malfunctions.
• Do not open the detergent box while water is supplied.
Fabric softener injection can fail.
NOTE
• Water drained after the final rinsing process may look
murky as it contains some fabric softener.
• If there is water in the fabric softener injection hole,
then take out the washing bucket and remove water
before injecting fabric softener.

Washing

Press the 전원 button.
1
• Add laundry into the washing bucket.
• Depending on the cycle selected, add a proper
amount of detergent or fabric softener.
• Apply the recommended amount of detergent as
indicated by the maker.
• If a specific washing cycle requires a different
amount of detergent, then refer to ʻUsing
Washing Cyclesʼ.
Select a cycle by turning the cycle selection dial.
2
(For more information of washing cycles, refer to
ʻWashing Cyclesʼ.)
• The default setting is automatically applied to
cycle options. If you want to change it, press the
option button.
Press the 동작/일시정지 button.
3
• The washer door will close. The amount of
laundry will be automatically detected. Water
supply will start and washing begins.
If your washer indicates the amount of detergent on the
display unit, proceed as follows.
Press the 전원 button.
1
Select a cycle by turning the cycle selection dial.
2
Press the 동작/일시정지 button.
3
• After the washer door closes, the amount of
laundry is automatically detected. The necessary
amount of detergent is displayed on the window.
Inject detergent and fabric softener into the
injection hole and close the door. After a moment,
water supply and washing will start.
25