Table of Contents
Advertisement
Figure 25 Connecting an AC power cord
1
Connecting the DC power cord
1.
Use a flat-blade screwdriver to remove the protection cover from the DC power supply.
2.
Correctly insert the DC plug into the DC power receptacle.
3.
Use a flat-blade screwdriver to fasten the screws on the DC plug.
4.
Use a cable tie to secure the DC power cord to the handle of the DC power supply.
5.
Connect the other end of the DC power cord to the DC power source.
Figure 26 Connecting a DC power cord
1
2
2
16
3
Advertisement
Table of Contents
