To ground the device:
1.
Use a Phillips screwdriver to remove the grounding screw from the chassis.
2.
Use the grounding screw to attach the ring terminal of the grounding cable to the chassis.
3.
Connect the other end of the grounding cable according to the grounding method you use:
Grounding the device with a grounding strip—If a grounding strip is available at the
installation site, connect the other end of the grounding cable to the grounding strip and make
sure the grounding strip has been correctly grounded.
Figure 12 Grounding the device with a grounding strip
Grounding the device with the rack—Connect the other end of the grounding cable to the
grounding point on the rack and make sure the rack has been correctly grounded.
7