Table of Contents
Advertisement
Installation
3.3* Adjusting the feet
If the product stands unbalanced after installation,
adjust the feet on the front by rotating them to the
right or left.
To adjust the doors vertically,
Loosen the fixing nut located at the bottom.
Rotate the adjusting nut according to the position
of the door (clockwise/counter-clockwise).
Tighten the fixing nut in order to fix the position.
To adjust the doors horizontally,
Loosen the fixing nut located at the top.
Rotate the side adjusting nut according to the
position of the door (clockwise/counter-clockwise).
Tighten the fixing nut which is at the top in order to
fix the position.
3.4 Electric connection
A
WARNING:
extension cables or multi-plugs.
B
WARNING:
be replaced by the Authorized Service
Agent.
C
If two coolers are to be installed side
by side, there should be at least 4 cm
distance between them.
• Our company shall not be liable for any
damages that will arise when the product
is used without grounding and electrical
connection in accordance with the national
regulations.
• Power cable plug must be within easy reach
after installation.
• Do not use extension cords or multiple socket
outlets.
9 / 37EN
Do not make connections via
Damaged power cable must
adjusting nut
fixing nut
fixing nut
adjusting nut
Refrigerator / User Manual
Advertisement
Table of Contents
