Feelworld L4 User Manual page 25

Press knob to confirm after modified the value
③.
(2) Change the PC's IP Address
To ensure that the L4 and the PC can communicate smoothly, the IP address of the computer
needs to be verified.
Steps to modify the IP address of the Ethernet port (windows).
1. Open the Network Sharing Center;
Click on "Ethernet";
3. Select "Use the following IP address" and change the IP address to the same network segment as L4
eg: L4's IP address is 192.168.0.99, then the computer's IP address can be set to 192.168.0.1-255. Please
make sure that the IP addresses do not conflict.
Connect Wirelessly with Your Router
The L4 provides wireless control, so you can control it from a greater distance when the L4 is
not in your immediate vicinity. A wireless router is required to use this feature. The
computer receives the WIFI signal from the wireless router you connect the L4 to.
Steps of wireless connection:
Connect the L4 to the router's LAN port
①.
Click icon , turn on DHCP switch
②.
Computer connects to Wi-Fi from the router
③.
2. Access to Properties may require administrator
privileges;
Under "This connection uses the following items",
find "Internet Protocol version 4 (TCP/IPv4)";
24