Feelworld L4 User Manual page 15

The device supports set IP address Manually and Automatically
SET IP Address Manually
Turn OFF DHCP and select each segment with the knob, then press to enter and set the
value of each segment by pressing the knob again.
Set IP Address Automatically
Use this setting if your network/router has a DHCP serve
Turn ON DHCP
manual setting is disabled, and the IP Address for L4 is set from the network.
Audio Bar: On/Off
Histogram: On/Off after turning on , the histogram will be shown on the lower right corner
of PST and PGM
Version Info.: including hardware version, software version and SN
Click START and follow the prompts to calibrate T-bar
T-bar Calibration:
Language: EN, 中文
HDMI OUT: PST, PGM
PST: It is for multi-view
PGM: It is for main picture output
PGM Format: click to select resolution of program out
LOGO: ON/OFF
Export the LOGO file from the software FEELWORLD Live Plus (details see 5.2.2 SW - LOGO
Overlay - Export Bin ) to the USB flash drive, then insert it into the USB2.0 interface of L4.
Click to Choose File to import the LOGO , and then click "ON" to open LOGO overlay
function.
Position: adjust the logo position using the up, down, left, and right arrow keys
14