V-Belt Holders; Passenger Grip Warmer Switch - Yamaha VK PROFESSIONAL-II 2016 Owner's Manual

Control functions
1. Drive guard
2. Drive guard locking pin
2. Lift up the rear of the drive guard as
shown, and then pull the guard rearward
to remove it.
To install the drive guard
1. Fit the front slots in the drive guard over
the projections on the drive guard front
holder.
1
1. Drive guard
22
1
2
2. Align the slots in the rear of the drive
guard with the projections on the drive
guard rear holder, and then insert the
drive guard locking pin into the holder as
shown.
2
1. Drive guard
2. Drive guard locking pin
ESU10762

V-belt holders

Keep a spare V-belt for emergency use by
placing it into the V-belt holders provided.
1. V-belt holder
ECS00181
NOTICE
Make sure that the V-belt is installed se-
curely in the holders.
ESU10682

Passenger grip warmer switch

The passenger grip warmer switch controls
the electrically heated passenger grips.
1
1