Tool Kit; Removing And Installing The Shroud And Covers - Yamaha APEX RX10RY Owner's Manual

ESU11740

Tool kit

The owner's tool kit has the tools which are
sufficient for most periodic maintenance and
minor repairs. A torque wrench is also neces-
sary to properly tighten nuts and bolts.
1. Tool kit
ECS00360
NOTICE
Before starting the engine, make sure that
the tool kit is properly seated in its holder
and is securely fastened.
TIP
If you do not have a torque wrench available
during a service operation requiring one, take
your snowmobile to a Yamaha dealer to
check the torque settings and adjust them if
necessary.
ESU12892
Removing and installing the
shroud and covers
EWS00091
WARNING
Be sure shroud and covers are secured
before operation. A loose shroud or cover
could move and cause loss of control.
Shroud
To remove the shroud
Loosen the fasteners, slowly raise the shroud,
and then unhook the shroud from the shroud
stay.
Periodic maintenance and adjustment
1. Fastener
1. Shroud
To install the shroud
Hook the end of the shroud onto the shroud
stay, slowly lower it to the original position,
and then tighten the fasteners.
1. Shroud stay
Left and right side covers
To remove a side cover
1. Remove the shroud. (See the above pro-
cedure.)
43