V-Belt Holders; Storage Compartment; Rear Carrier (Rx10Mt) - Yamaha APEX RX10RY Owner's Manual

Table of Contents

Advertisement

Make sure that the drive guard is tight-
G
ened securely before operating the
snowmobile to protect against severe
injury or death from a broken V-belt or
other part should it come off the snow-
mobile while it is in operation.
ECS00830
NOTICE
Never run the engine with the V-belt re-
moved. Clutch components can be dam-
aged.
The drive guard is designed to cover the V-
belt clutch and V-belt in case parts break or
come loose.
1. Drive guard
ESU10760

V-belt holders

Keep a spare V-belt for emergency use by
placing it into the V-belt holders provided.
1. V-belt holder
Control functions
ECS00180
NOTICE
Make sure that the V-belt is installed se-
curely in the holders.
ESU10810

Storage compartment

Open the storage compartment to store the
tool kit, spare parts, or other small items.
1. Storage compartment
ESU10840

Rear carrier (RX10MT)

The rear carrier is located at the rear of the
snowmobile.
1. Rear carrier
Maximum load limit:
10 kg (22 lb)
EWS00140
WARNING
Do not use the rear carrier to lift the snow-
mobile. The snowmobile could fall, which
could result in severe injury or death.
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Apex rx10rtryApex rx10ltyApex rx10mty

Table of Contents