Advertisement
Equinox Scorpio Laser
Operation modes
Operation modes:
The Scorpio has three modes of operation as follows:
1, Sound active mode
To select sound active mode set dip switch 10 to ON and all others to OFF. You can now use the
sensitivity control on the back panel to set the required sound level. With no music present, the
laser diode will turn OFF and will come back ON as soon as the music starts again.
2, Auto pattern mode
To select auto pattern mode, set dip switch 9 and 10 to the ON position and all others to OFF. The
Scorpio will now cycle through all it's internal geometric patterns. In this mode the laser diode will
remain on constantly until the power is turned OFF or the mode is changed.
3, DMX mode
To select DMX mode, set dip switch 10 to OFF. You can now set the required DMX address using
dip switches 1 to 9. Please refer to the chart below for DMX functions.
DMX function chart:
Advertisement
