Lsi Megaraid Or Intel Rste Selection Jumper (3-Pin Raid_Sel1); Me Firmware Force Recovery Setting (3-Pin Me_Rcvr1) - Asus RS720-E7/RS12-E User Manual

4. LSI MegaRAID or Intel RSTe selection jumper (3-pin RAID_SEL1)
This jumper allows you to select the PCH SATA RAID mode to use LSI
MegaRAID software or Intel® Rapid Storage Technology enterprise 3.0 RAID.
Place the jumper caps over pins 1–2 if you want to use the LSI MegaRAID
software RAID Utility (default); otherwise, place the jumper caps to pins 2–3
to use the Intel
5. ME firmware force recovery setting (3-pin ME_RCVR1)
This jumper allows you to force Intel Management Engine (ME) boot from
recovery mode when ME become corrupted.
4-6
Rapid Storage Technology Enterprise Option ROM Utility.
®
Chapter 4: Motherboard information