Raid Selection Jumper Setting (3-Pin Raid_Sel1); Me Firmware Force Recovery Setting (3-Pin Me_Rcvr1) - Asus TS700-E8-PS4 V2 User Manual

4.

RAID selection jumper setting (3-pin RAID_SEL1)

This jumper allows you to select the PCH SATA RAID mode to use LSI MegaRAID
software or Intel
caps over pins 1–2 if you want to use the LSI MegaRAID software RAID Utility (default);
otherwise, place the jumper caps to pins 2–3 to use the Intel
Enterprise Option ROM Utility.
5.

ME firmware force recovery setting (3-pin ME_RCVR1)

This jumper allows you to force Intel Management Engine (ME) boot from recovery mode
when ME become corrupted.
4-16
Rapid Storage Technology enterprise 3.0 RAID. Place the jumper
®
Rapid Storage Technology
®
Chapter 4: Motherboard Information