Download Print this page

Operation Instructions - Omega OC64TB Instruction Manual

Advertisement

Operation Instructions

The hob is controlled by pressing the appropriate electronic button. Each button pressed is followed by a
buzzer sound.
1.
Heater display
2.
Activate/Deactivate heater
3.
Heat setting decrease
4.
Heat setting increase
5.
Decimal point
6.
Key lock indicator
7.
Key lock
8.
On/Off
Switching the Appliance On and Off
If the appliance is in Stand-By mode, it is put in Operating mode by pressing the On/Off
button
for at least 1 second. A buzzer will sound to indicate the successful operation.
A "0" will appear on all heater displays and all decimal points corresponding to the heaters will
flash (1 second on, 1 second off).
If there is no operation within 10 seconds, all heater displays will switch off.
If the displays do switch off, the heater will be sent into Stand-By mode.
If
is pressed for more than 2 seconds (in Operating mode), the appliance will switch off
and will enter S-Mode again. The appliance can be switched off by pressing
if other buttons are pressed simultaneously.
If there is any residual heat from a heater, this will be indicated in the corresponding heater
display.
Selecting a Heater
If a single heater is chosen with the corresponding Activate/Deactivate Heater Button
of the heater display will flash. For the selected heater, you can set the heat level between 1 and 9 by
pressing the Heat Setting Buttons
The buttons must be pressed within 3 seconds of selecting a heater, otherwise the heater selection will be
erased and the heat setting decimal point will disappear. If there is no further operation within 10 seconds,
the heater reverts back to S-Mode.
The heat setting can always be changed by pressing
Each button operation or each display change is accompanied by a buzzer sound.
Mode Descriptions
Mains supply is applied to
the hob control and all
Stand-By-
S-Mode
heater displays are off or a
Mode
residual heat display is
active.
At least one heater display
Operating-
shows a heat setting
B-Mode
Mode
between ´0` and ´9`.
Lock Mode
VR-Mode The hob control is locked.
or
.
or
8
. The available settings are between 1 and 9.
at any time; even
, the decimal point

Advertisement

loading